Transfer Gear Outer Bearing Race: Installation

Clean the bearing bore with a lint free cloth and inspect for damage to the bellhousing casting. If the bellhousing is damaged the transmission will require replacement.

1. Place the NEW  transfer gear outer bearing race in position in the bellhousing bore.

   Courtesy of CHRYSLER GROUP, LLC

2. Using and suitable hammer and tool (special tool #10036, Installer, Bearing Cup) (1) with (special tool #C-4171, Driver Handle, Universal) (2), drive the transfer gear outer bearing race (3) into the bellhousing bore until it seats down to the bottom stop.
3. Install the bellhousing. Refer to BELLHOUSING, REMOVAL AND INSTALLATION .
4. Install the transmission in the vehicle. Refer to REMOVAL AND INSTALLATION .