LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Heating & Air Conditioning (Service Information) >> Controls, Front >> Actuator, Blend Door, Front >> Removal And Installation >> Right >> Installation

Removal And Installation: Right: Installation

GC0178263Courtesy of CHRYSLER GROUP, LLC
  1. Install the blend door actuator (1) on the HVAC housing by aligning the splines of the actuator with the splines of the door.
  2. Install the blend door actuator mounting bolts (2). Tighten the bolts securely.
  3. Install the wire harness connector (3) to the blend door actuator.
  4. Install the right side floor distribution duct. Refer to DUCT, FLOOR DISTRIBUTION, REMOVAL AND INSTALLATION .
  5. Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
  6. Install the passenger side knee blocker air bag. Refer to AIR BAG, KNEE BLOCKER, REMOVAL AND INSTALLATION .
  7. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  8. Calibrate the A/C heater control. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals