LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Heating & Air Conditioning (Service Information) >> Distribution, Front >> Housing, HVAC >> Removal And Installation >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING:

Disable the airbag system before attempting any steering wheel, steering column or instrument panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable. Wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to follow these instructions may result in possible serious or fatal injury.

WARNING:

Review the warnings and cautions for this system before performing the procedure. Failure to follow these instructions may result in serious or fatal injury.

  1. Remove the instrument panel and Heating, Ventilation and Air Conditioning (HVAC) housing assembly. Refer to PANEL, INSTRUMENT, REMOVAL AND INSTALLATION .
    GC0177699Courtesy of CHRYSLER GROUP, LLC
  2. Remove the HVAC housing to instrument panel frame fasteners (1, 3).
    GC0178187Courtesy of CHRYSLER GROUP, LLC
  3. Remove the remaining HVAC housing to instrument panel frame fasteners (1, 2).
  4. Remove the HVAC housing (3) from the instrument panel carrier frame.