Removal And Installation: Installation
NOTE:
If a foam seal on the HVAC housing or air inlet housing is deformed or damaged, the seal must be replaced.
NOTE:
Replacement of the O-ring seals is required anytime a refrigerant line or A/C expansion valve is disconnected. Failure to replace the O-ring seals may result in a refrigerant system leak.
- If a NEW
HVAC housing is being installed, install the fasteners (1) that secure the adapter (2) to the instrument panel duct assembly. Tighten the fasteners securely.
- Position the HVAC housing to the instrument panel carrier frame. Install the two HVAC housing to instrument panel frame bolts (1, 2) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Install the remaining HVAC housing to instrument panel frame bolts and nut (1, 3), and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Install the instrument panel and HVAC housing assembly in the vehicle. Refer to PANEL, INSTRUMENT, REMOVAL AND INSTALLATION .
