LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> 3.6L Engine (Service Information) >> Engine Mounting >> Insulator, Engine Mount, Left >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0178110Courtesy of CHRYSLER GROUP, LLC
  1. If removed, install the left transmission mount bracket. Tighten the bolts (1) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
    GC0177402Courtesy of CHRYSLER GROUP, LLC
  2. If removed, install the wire harness retaining bracket onto the left transmission mount bracket. Tighten the bolts (1) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
    GC0178065Courtesy of CHRYSLER GROUP, LLC
  3. Install the left transmission mount. Tighten the transmission mount to frame bolts (2) to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  4. Install the three transmission mount to transmission mount bracket bolts (1) and tighten to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  5. Install the mount brace bolts (3) to the transmission mount and to the body, then tighten to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
  6. Remove the floor jack.
  7. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  8. Install the belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION or BELLY PAN, FRONT, REMOVAL AND INSTALLATION .
  9. Install the battery tray. Refer to TRAY, BATTERY, REMOVAL AND INSTALLATION .
  10. Install the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
  11. Connect the negative battery cable.
scientia non olet · About LEMON Manuals