Single Tab Type Fitting

Courtesy of CHRYSLER GROUP, LLC

This type of quick-connect fitting (2) is equipped with a single pull tab (1). The tab is removable. After tab is removed, the quick-connect fitting (2) can be separated from the fuel system component (4). Special tools are not required for removal.

1. Press release tab (3) on side of fitting to release pull tab (1).
   NOTE:

   If release tab is not pressed prior to releasing pull tab, pull tab will be damaged.

   Courtesy of CHRYSLER GROUP, LLC

2. While pressing the release tab on the side of the quick-connect fitting use a screwdriver (2) to pry up the pull tab (1).
3. Raise the pull tab (1) until it separates from the quick-connect fitting (3).
4. Remove the quick-connect fitting (3) from the fuel system component.