Removal And Installation: Installation
- Check the condition of all the pulleys.CAUTION:
When installing the serpentine accessory drive belt, the belt MUST be routed correctly. If not, the engine may overheat due to the water pump rotating in the wrong direction.
- Route the serpentine belt around all the pulleys except the idler pulley.
- Rotate the belt tensioner (1) until it contacts its stop position. Route the serpentine belt around the idler and slowly let the tensioner relax. Make sure the belt is properly seated onto all pulleys.
- Install the lower radiator hose (2) and the lower bypass hose (1).
- Install the wheel house splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION .
- Install the tire and wheel assembly.
- Fill the cooling system. Refer to HOISTING, STANDARD PROCEDURE .
