LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (Service Information) >> Starter >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION or BELLY PAN, FRONT, REMOVAL AND INSTALLATION or BELLY PAN, REAR, REMOVAL AND INSTALLATION or BELLY PAN, REAR SUSPENSION, REMOVAL AND INSTALLATION or BELLY PAN, SIDE, REMOVAL AND INSTALLATION .
  3. Remove the front catalytic converter. Refer to CONVERTER, CATALYTIC, REMOVAL AND INSTALLATION .
  4. Unbolt the Y-pipe, allowing it to hang down. Refer to PIPE, EXHAUST CROSSUNDER, REMOVAL AND INSTALLATION .
    GC0200264Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the battery positive and the solenoid connection (1) from the starter.
  6. Remove the clips (2) and move the wiring harness aside.
    GC0200247Courtesy of CHRYSLER GROUP, LLC
  7. Remove the fasteners (2) securing the starter to the transmission bell housing and remove the starter (1).
scientia non olet · About LEMON Manuals