Removal And Installation: Installation
- Position the starter motor (1), Install and tighten the mounting bolts (2) to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
- Install the battery cable and secure the clips (2), install the B+ nut and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Connect the starter electrical connector (1).
- Install the Y-pipe. Refer to PIPE, EXHAUST CROSSUNDER, REMOVAL AND INSTALLATION .
- Install the front catalytic converter. Refer to CONVERTER, CATALYTIC, REMOVAL AND INSTALLATION .
- Connect the negative battery cable.
