Removal And Installation: Installation

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Lock cylinder is only present on the front driver door. The remaining doors are equipped with a delete cap. The delete caps are removed/installed similar to the lock cylinder.

Position the lock cylinder (1) into the trim cap (2).

Courtesy of CHRYSLER GROUP, LLC
Position the door lock cylinder/trim cap (1) onto the front door.
Tighten the slide plate screw (2) securely and install the protective plug over the fastener opening (2).
Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.