Removal And Installation: Installation
- Assemble the cover (2) to the foam.
- Install the seat cushion as an assembly, onto the seat frame.
- Install the trim support (1) and pull the trim cover (2) over the trim support.
- Secure all the seat cushion cover retainers (1).
- Install the seat panel (2) and the snap the leg cover (3) into place.
- Install the hinge cover (1).
- Install the cover (3) the two screws (1).
- Install the side cover (3) and the screw (1) on both sides of the seat.
- Clip the soft cover (2) into place.
- Install the third row Stow-N-Go seat into the vehicle. Refer to SEAT, STOW-N-GO, REMOVAL AND INSTALLATION .
