Removal And Installation: Removal
- Open the liftgate.
- Using a trim stick or equivalent, remove the liftgate lamp (3) and disconnect the wire harness connector, if equipped.
- Using a trim stick or equivalent, release the top of the pull cup (1) first then the bottom and remove. Remove both pull cups.
- Using a trim stick or equivalent, release the retaining clips and remove the lower liftgate trim panel (2).
- Using a trim stick or equivalent, release the retaining clips and remove the upper liftgate trim panel (2).
- Using a trim stick or equivalent, release the retaining clips and remove the side liftgate trim panels (1).
