Removal And Installation: Removal
- Stow the second row Stow-n-Go seats.
- Remove the second row center seat, if equipped.
- Move the front seats to the full forward position and remove the seat track covers (1).
- Remove the nut covers (1), then remove the nuts and the cover trim (2) under the front seats.
- Using a trim stick or equivalent, release the retaining clips and remove the rear center filler panel (1).
- Remove the load floor cover cables (1).
- Remove the lower B-pillar trim panel. Refer to PANEL, B-PILLAR TRIM, LOWER, REMOVAL AND INSTALLATION .
- Remove the nuts (2) around the perimeter, then the load floor frame (1).
