Removal And Installation: Installation

Courtesy of CHRYSLER GROUP, LLC

Before proceeding with the following repair procedure, review all warnings and cautions. Refer to SEATS, FIRST ROW, WARNING .
If the seat cushion is being replaced, the OCM (Occupant Classification Module) components must be replaced. Refer to MODULE, OCCUPANT CLASSIFICATION (OCM), REMOVAL AND INSTALLATION .
Position the seat cover to the seat foam and engage the clip strips.
Pull the seat cover tight and engage the hook and loop fasteners.
Position the seat cushion assembly on the seat frame and connect the wire harness connector (1).
Engage the ventilation pad to the ventilation fan. Make sure all four tabs (2) are engaged fully.

Courtesy of CHRYSLER GROUP, LLC
Route the wire harness (2) and connect the wire harness connector (3).
Fasten the J-hooks (1) and install the push fastener around the perimeter of the seat cover.
Install the front seat back. Refer to SEAT BACK, FRONT, REMOVAL AND INSTALLATION .
If the seat is equipped with OCM, the module MUST be re-zeroed. Refer to STANDARD PROCEDURE .