LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Body - Interior & Exterior >> Seats, First Row >> Seat, Front >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0177957Courtesy of CHRYSLER GROUP, LLC
  1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to SEATS, FIRST ROW, WARNING .
  2. Position the front seat (5) into the vehicle.
  3. Connect the wire harness connectors.
  4. Install the front seat bolts (3) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  5. Install the bolt covers (4).
  6. Connect the negative battery cable and move the front seat to the full forward position. Disconnect and isolate the negative battery cable.
  7. Install the front seat bolts (2) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  8. Install the load floor frame. Refer to LOAD FLOOR, FRAME, REMOVAL AND INSTALLATION .
  9. Connect the negative battery cable.
  10. The supplemental restraint system verification test procedure should be performed following service of any supplemental restraint system component. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals