Removal And Installation: Removal
- Remove the third row Stow-N-Go seat. Refer to SEAT, STOW-N-GO, REMOVAL AND INSTALLATION .
- Using a trim tool, remove the end clip from the soft cover (2), and remove the screw (1).
- Pull at the front of the side cover (3) to release the clip, then lift off the recliner to remove. Remove both side covers.
- Remove the two screws (1).
- Pull at the bottom of the cover (3) to release the clips, then lift to remove from the seat frame.
- Remove the third row Stow-N-Go seatback cover. Refer to COVER, SEAT BACK, STOW-N-GO, REMOVAL AND INSTALLATION .
- Open the cover (3) and disconnect the cable end (1). Release the headrest cable (2) from the housing.
- Remove the two headrest nuts (4) and four bolts (2), then the headrest mechanism (1).
- Using a trim tool, remove the seatback board (1).
- Remove the seat belt buckle (1).
- Remove the seatback recliner bolts (3) on both sides of the seat and remove the seatback frame assembly (2).
