LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body - Interior & Exterior >> Exterior >> Fender, Front >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Apply adhesive tape to the surrounding body panels to protect against damage.
  2. Remove the cowl panel cover. Refer to COVER, COWL PANEL, REMOVAL AND INSTALLATION .
  3. Remove the wheel on the side of the vehicle being worked on. Refer to REMOVAL AND INSTALLATION .
  4. Remove the wheelhouse splash shield from the side of the vehicle being worked on. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION  or SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL AND INSTALLATION .
  5. Remove the sill cladding. Refer to CLADDING, BODY, SILL, REMOVAL AND INSTALLATION .
  6. Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL AND INSTALLATION .
  7. Remove the headlamp assembly from the side of the vehicle being worked on. Refer to UNIT, FRONT LAMP, REMOVAL AND INSTALLATION .
    GC0178153Courtesy of CHRYSLER GROUP, LLC
  8. Open the door and remove the bolt (2) from the fender (1).
    GC0177982Courtesy of CHRYSLER GROUP, LLC
  9. Remove the two bolts (1) from the bottom.
    GC0177959Courtesy of CHRYSLER GROUP, LLC
  10. Remove the bolt (1).
    GC0177706Courtesy of CHRYSLER GROUP, LLC
  11. Remove the two bolts (1).
    GC0177441Courtesy of CHRYSLER GROUP, LLC
  12. Remove the three bolts (1).
    GC0178317Courtesy of CHRYSLER GROUP, LLC
  13. Remove the fender (2) from the vehicle.
scientia non olet · About LEMON Manuals