LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body - Interior & Exterior >> Interior >> Console, Overhead, Front >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0178195Courtesy of CHRYSLER GROUP, LLC
  1. Connect the wire harness connector to the overhead console (4).
  2. Position the hooks (1) into the roof, then push up to engage the front retaining clips.
  3. Open the rear observation mirror (3) and install the screws (2). Tighten the screws securely.
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals