Removal And Installation: Installation

Courtesy of CHRYSLER GROUP, LLC

Insert the upper tabs (1) of the upper B-pillar trim panel (3) into the body.
Align the seat belt height adjuster bezel then align retaining clips from B-pillar trim into slots on B-pillar and press to fully seat retainers.
NOTE:
Move the seat belt height adjuster up and down to check that it works properly. If it does not work properly, remove the B-pillar trim and align the seat belt height adjuster bezel.

Courtesy of CHRYSLER GROUP, LLC
Install the grab handle bolts (1) and tighten securely. Install the bolt covers.

Courtesy of CHRYSLER GROUP, LLC
Position the B-pillar extension (1) and hand tap to engage the retaining clips.
Install the front seat belt turning loop and cover. Refer to RETRACTOR, SEAT BELT, REMOVAL AND INSTALLATION .