LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> Body - Interior & Exterior >> Doors - Front >> Panel, Door Trim >> Removal And Installation >> Removal

Removal And Installation: Removal

GC0177712Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the window switch assembly. Refer to SWITCH, POWER WINDOW, REMOVAL AND INSTALLATION .
  3. Using a small flat bladed tool or equivalent, remove the pull cup trim mat (1).
    GC0177683Courtesy of CHRYSLER GROUP, LLC
  4. Remove the bolt (1).
    GC0177661Courtesy of CHRYSLER GROUP, LLC
  5. Using a small flat bladed tool or equivalent, remove the trim cover (1).
    GC0178123Courtesy of CHRYSLER GROUP, LLC
  6. Remove the bolt (1).
    GC0178376Courtesy of CHRYSLER GROUP, LLC
  7. Using special tool (special tool #C-4829A, Remover, Trim), separate the 12 attachment fasteners (1).
    GC0177343Courtesy of CHRYSLER GROUP, LLC
  8. Separate the trim panel assembly (1) from the door (2).
    GC0178289Courtesy of CHRYSLER GROUP, LLC
  9. Disconnect the trim panel wire harness connectors.
  10. Disconnect the interior handle cables (1) and remove the trim panel assembly.
scientia non olet · About LEMON Manuals