LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Window Motors & Regulators >> Body - Interior & Exterior >> Instrument Panel >> Gap Hider, Steering Column Shroud >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0177537Courtesy of CHRYSLER GROUP, LLC
  1. Align the gap hider (3) and engage the retaining clips into the instrument panel.
  2. Position the instrument panel center trim (1) and engage the retaining clips.
  3. Connect the electrical harness connector to the start stop switch (2).
    GC0177851Courtesy of CHRYSLER GROUP, LLC
  4. Position the media hub bezel (3) and engage the retaining clips.
  5. Install the screw located in the media hub bezel opening, and tighten securely.
  6. Install the instrument cluster bezel. Refer to BEZEL, INSTRUMENT CLUSTER, REMOVAL AND INSTALLATION .
  7. Install the steering column lower shroud. Refer to SHROUD, STEERING COLUMN, REMOVAL AND INSTALLATION .
  8. Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals