Removal And Installation: Installation
NOTE:
When the spoiler is removed for repair or replacement, the gaskets at the spoiler attachment locations should be replaced.
- Position the spoiler onto the liftgate and engage the pinch fasteners.
- Install the five nuts and tighten securely, starting from the center of the spoiler.
- Install the nut covers (8) on both sides of the liftgate.
- Install the screw (6) on both sides of the liftgate.
- Install the pinch sensors (5) on both sides of the liftgate.
- Connect the wire harness connector (1).
- Connect the rear washer hose (3) and clip it onto place (2).
- Install the liftgate trim panels. Refer to PANEL, TRIM, REMOVAL AND INSTALLATION .