Removal And Installation: Installation
- Install two forward fasteners of Lower B-Pillar/Rear Scuff (1) to mating Cowl/Scuff retainers.
- Align the remaining four forward fasteners (2) to mating sockets of wire trough and press in.
- Align the six rearward fasteners of Lower B-Pillar/Rear Scuff (4) to mating sockets in wire trough and press in.
- Align the two metal clips (3) to the slots of the B-Pillar column and press in.
- Install cover (5) to B-Pillar/Rear Scuff Belt opening.
- Spread the side flanges of the B-Pillar extension apart at the upper edge and align the two upper clips to the retainer sockets of the B-Pillar column (2). Pull from outside vehicle to install.NOTE:
Connect the front seat position switch electrical connector, if equipped.
- Spread the side flanges of the B-Pillar extension apart at the lower edge and pull from outside vehicle to install.
- Press in lower side flanges to seat side snaps.
- Install the three rearward tabs into rear quarter trim (3) slots and push Scuff extension rearward (1) to engage clips
- Align forward snap of scuff extension to rear retention slot of Lower B-Pillar/Rear Scuff. Press down (2) to install all 5 retention clips
