8.4 Inch Screen

REMOVAL 

1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.

   Courtesy of CHRYSLER GROUP, LLC

2. With a suitable tool, remove the radio display trim bezel (1) and disconnect the two wire harness connectors.

   Courtesy of CHRYSLER GROUP, LLC

3. Remove the five radio screen to radio bezel screws (1), and remove the display (2) from the bezel (3).

INSTALLATION 

1. Position the radio screen (2) into the bezel (3).
2. Install and securely tighten the five radio display to radio bezel screws (1).
3. Connect the two wire harness connectors.

   Courtesy of CHRYSLER GROUP, LLC

4. Carefully install the radio display trim bezel (1).
5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
   NOTE:

   Uconnect® + SiriusXM Guardian Applications will be automatically updated in the replacement radio through the radio's embedded cellular phone based on the customers present subscription status. This update process may take up to an hour, depending upon the number of apps and adequate cellular services accessibility. The dealer is not expected to perform this process or to oversee it, but may need to explain to the vehicle owner or operator that some features and applications may not be fully restored and overall system response may be slowed until the process has completed.