LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Door (DDM/PDM) >> Removal And Installation >> Rear >> Installation

Removal And Installation: Rear: Installation

  1. Position the rear door control module to the sliding door carrier for installation.
    GC0177601Courtesy of CHRYSLER GROUP, LLC
  2. Install and tighten the screws (1, 2) that secure the rear door control module to the carrier. Tighten the screws securely.
    GC0177640Courtesy of CHRYSLER GROUP, LLC
  3. Connect the electrical connectors (2) to each of the rear door control module (1) connector receptacles.
  4. Install the trim panel. Refer to PANEL, DOOR TRIM, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable.
  6. Perform the door module learn procedure. Refer to DOOR MODULE LEARN PROCEDURES .
scientia non olet · About LEMON Manuals