Removal And Installation: Installation

NOTE:

Any time a power sliding door component is removed, replaced, door adjustment is performed or diagnostic trouble codes are addressed and erased, a learn cycle must be performed. The power sliding door learn cycle enables the power sliding door control module to learn or relearn critical information (travel limits, resistance to door travel, door position, etc.) which allows the system to perform properly and safely for the appropriate procedure. Refer to STANDARD PROCEDURE .

Maneuver the power sliding door control module through the valley below the track and position the module for fastening to the track.

Courtesy of CHRYSLER GROUP, LLC
Secure the power sliding door module to the lower power sliding door track using two fasteners (1).

Courtesy of CHRYSLER GROUP, LLC
Connect the body wiring harness and the power sliding door drive unit wiring harness connection (1) to the power sliding door module (1).
Position the weatherstrip back to the installed position.
Connect the negative battery cable.
Perform the power sliding door learn cycle. Refer to POWER SLIDING DOOR LEARN CYCLE .