LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Hands Free Liftgate >> Removal And Installation >> With Trailer Tow >> Removal

With Trailer Tow: Removal

multimedia:A supplement to the article is available.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the lower fasteners off the bottom of the rear fascia.
    GC0177240Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the body wiring harness connector (1) from the Hands Free Entry Power Liftgate (HFEPLG) module
    GC0178368Courtesy of CHRYSLER GROUP, LLC
  4. Remove the fasteners (1) securing the HFEPLG module with sensor assembly to the vehicle.
    GC0178271Courtesy of CHRYSLER GROUP, LLC
  5. Loosen the wiring harness from any tie down straps (1) between the two sensors with modules.
    GC0178367Courtesy of CHRYSLER GROUP, LLC
  6. Slide the wiring harness (2) over the trailer tow hitch (1).
  7. Remove the HFEPLG module with sensor from the vehicle.
scientia non olet · About LEMON Manuals