LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Park Assist (PAM) >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0177893Courtesy of CHRYSLER GROUP, LLC
  1. Position the Park Assist Module (PAM) (1) to the right quarter inner panel, to the rear of the C-pillar and above the right rear wheel house.
  2. Install the fasteners (2) that secure the PAM (1) to the right quarter inner panel.
  3. Connect the wire harness connectors (3) to the PAM connector receptacles.
  4. Install the right quarter inner trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals