LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Chime/Buzzer/Driver Assist (Service Information) >> Camera, Surround View >> Removal And Installation >> Rear Camera >> Removal

Rear Camera: Removal

  1. Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
  2. Remove the rear lamp bar. Refer to LAMP BAR, EXTERIOR HANDLE, REMOVAL AND INSTALLATION .
    GC0178185Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the jumper wire harness connector (3) from the Rear View Camera (RVC) (2) on the back of the lamp bar.
  4. Remove the RVC to lamp bar fasteners (1) and remove the RVC.
scientia non olet · About LEMON Manuals