Removal And Installation: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
- Remove the three retaining clips for the hush panel and remove from vehicle.
- Disconnect the wire harness connectors from the amplifier.NOTE:
Once the glove box and hush panel are remove, this is an access hole (1) for the top amplifier bolt.
HVAC assembly removed for clarity
- Position the floor lighting aside for access to lower fastener then remove the amplifier bracket to instrument panel carrier frame bolts (2).
- Remove the amplifier and bracket (1).
- If having trouble removing bracket and amplifier, remove the four fasteners that secure the amplifier to bracket and remove separately.
