LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Audio/Video/Entertainment/Connectivity (Service Information) >> Speaker >> Removal And Installation >> Sliding Door >> Removal

Sliding Door: Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the trim panel from sliding door to access the speaker. Refer to PANEL, DOOR TRIM, REMOVAL AND INSTALLATION .
    GC0177245Courtesy of CHRYSLER GROUP, LLC
  3. Remove the four speaker mounting screws (1).
  4. Carefully pull the speaker (2) from the inner door panel and disconnect the wire harness connector from the speaker.
  5. Remove the speaker (2) from the vehicle.
scientia non olet · About LEMON Manuals