LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LX, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Accessories Control Systems >> Power Sliding Door (Service Information) >> Harness, Wiring >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Position the wire harness into the sliding door track cavity and route the harness properly to the sliding door.
  2. Secure the harness to the door using the tie down retainers.
  3. Connect the sliding door wire harness to the body wiring harness connector in the sliding door.
  4. Install the retainers at the bottom of the sliding door that hold the harness to its proper routing position.
  5. Connect the wiring harness plastic retainer to the track.
  6. Connect the sliding door wire harness connector to the connector located in the trough.
  7. Connect the battery negative cable.
scientia non olet · About LEMON Manuals