LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Controls, Rear Cabin Comfort (RCCC). >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0178107Courtesy of CHRYSLER GROUP, LLC
  1. Position the RCCC (3) to the RCCC bezel (2) and install the four screws (1). Tighten the screws securely.
    GC0177908Courtesy of CHRYSLER GROUP, LLC
  2. Position the RCCC and RCCC bezel (4) to the headliner (2).
  3. Connect the wire harness connector (3) to the RCCC (4).
  4. Install the four headliner (2) to RCCC (4) screws (1). Tighten the screws securely.
  5. Install the headliner. Refer to HEADLINER, REMOVAL AND INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals