LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Fuel Pump Control >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0170603Courtesy of CHRYSLER GROUP, LLC
  1. Position the Fuel Pump Control Module (FPCM) to the forward part of the left rear wheel housing.
  2. Install and tighten the fasteners (1) that secure the FPCM to the left rear wheel housing.
  3. Connect the body wire harness connector (2) to the FPCM connector receptacle.
  4. Install the trim onto the left rear quarter panel. Refer to PANEL, QUARTER TRIM, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals