LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating & Air Conditioning (Service Information) >> Controls, Front >> Actuator, RECIRCULATION Door >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0177751Courtesy of CHRYSLER GROUP, LLC
  1. Install the recirculation door actuator (2) on the HVAC housing by aligning the splines of the actuator with the splines of the door.
  2. Install the two recirculation door actuator bolts (1). Tighten the bolts securely.
  3. Connect the wire harness connector (3) to the recirculation door actuator.
  4. Install the right side floor distribution duct. Refer to DUCT, FLOOR DISTRIBUTION, REMOVAL AND INSTALLATION .
  5. Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
  6. Install the passenger side knee blocker air bag. Refer to AIR BAG, KNEE BLOCKER, REMOVAL AND INSTALLATION .
  7. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals