LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Front >> Stabilizer Bar, Front >> Removal And Installation >> AWD >> Installation

Removal And Installation: AWD: Installation

  1. Install the stabilizer bar bushings to the stabilizer bar.
  2. Install the stabilizer bar brackets over the bushings.
    GC0200352Courtesy of CHRYSLER GROUP, LLC
  3. Position the stabilizer bar to the crossmember.
  4. Install the stabilizer bar bracket fasteners (2). Tighten the stabilizer bar bracket fasteners to the proper torque specification. Refer to FRONT, TECHNICAL SPECIFICATIONS .
  5. Install the front crossmember. Refer to CROSSMEMBER, FRONT SUSPENSION, REMOVAL AND INSTALLATION .
  6. Install the tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  7. Remove the supports and lower the vehicle.
scientia non olet · About LEMON Manuals