Removal And Installation: Installation.

NOTE:

Torque all fasteners with the vehicle on the ground at ride height.

Position toe link on vehicle.

Courtesy of CHRYSLER GROUP, LLC
Install toe link to knuckle fastener (2) Do not tighten at this time.
Install toe link to crossmember adjustable cam fastener (3) Do not tighten at this time.
Install tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
Remove the support and lower vehicle.
Position vehicle on a alignment rack and raise vehicle to access mounting fasteners.
NOTE:
Align the adjustable cam fastener with the location marked in the removal process for a starting point before alignment.
Tighten toe link to crossmember fasteners to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
Tighten toe link to knuckle fastener to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
Perform four wheel alignment. Refer to WHEEL ALIGNMENT, STANDARD PROCEDURE .