LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Stabilizer Bar, Rear Suspension >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0200343Courtesy of CHRYSLER GROUP, LLC
  1. Place the stabilizer bar bushings on the stabilizer bar.
  2. Install the stabilizer bar brackets over the stabilizer bar bushings.
  3. Position the stabilizer bar assembly to the axle and center it with equal spacing on both sides.
  4. Install the stabilizer bar fasteners (1) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  5. Connect both stabilizer bar links to the stabilizer bar. Refer to LINK, STABILIZER BAR, REMOVAL AND INSTALLATION .
  6. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals