Removal And Installation: Removal
- Remove the liftgate trim panels. Refer to PANEL, TRIM, REMOVAL AND INSTALLATION .
- Unclip the rear washer hose (2) and disconnect it at the fitting (3).
- Disconnect the wire harness connector (1).
- Remove the covers (8) on both sides of the liftgate and the nuts behind them.
- Remove the three nuts (7).
- Remove the push fasteners and the pinch sensors (5) on both sides of the liftgate.
- Remove the screw (6) on both sides of the liftgate.
- Using pliers, release the two pinch fasteners (4) and remove the spoiler.