Rear Check Valve: Installation
- Connect the liftgate washer supply hose to the inlet nipple of the rear check valve (2). Be certain that the raised arrow that indicates the flow direction on the center section of the valve is pointed toward the washer supply hose nozzle connector (4).
- Connect the washer supply hose nozzle connector (4) to the outlet of the rear check valve (2).
- Install the spoiler to the outside of the upper liftgate header. Refer to SPOILER, DECKLID, REMOVAL AND INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.