Headlamp Washer Hoses And Tubes: Description
On vehicles configured with optional headlamp washers, the headlamp washer plumbing consists of small diameter rubber hoses that are routed from the washer reservoir (5) located at the right front corner of the engine compartment to the headlamp washer nozzles. The headlamp washer hose is attached to the headlamp washer pump/motor unit (6) located on the rear side of and near the bottom of the reservoir (5). The headlamp hose is then routed along the front side of the front end module (integral to the front fascia) to the headlamp washer nozzles (4).
The headlamp washer hose or tube is available for service only as roll stock, which must then be cut to length. The molded plastic washer hose fittings cannot be repaired. If these fittings are ineffective or damaged, they must be replaced.