Rear Washer Nozzle: Removal
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable
- Remove the liftgate spoiler (1) from the outside of the upper liftgate header. Refer to SPOILER, DECKLID, REMOVAL AND INSTALLATION .
- Disconnect the washer hose (4) from the nipple of the rear washer nozzle (3).
- Using a suitable tool, compress the latch features that secure the rear washer nozzle (2) in the mounting hole of the liftgate outer panel (1) far enough to release the nozzle from the mounting hole and remove the nozzle from the liftgate spoiler.