LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) >> Cylinder Head >> Solenoid, Variable Valve Lift >> Removal And Installation >> Bank-1-Solenoid-1 >> Removal

Removal And Installation: Bank-1-Solenoid-1: Removal

  1. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
  2. Disconnect and isolate the negative battery cable.
    GC0178067Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the fuel vapor line (1).
    GC0177446Courtesy of CHRYSLER GROUP, LLC
  4. Position the fuel vapor tube assembly aside.
    GC0177833Courtesy of CHRYSLER GROUP, LLC
  5. Disconnect the wire harness connector (1) from the Variable Valve Lift (VVL) solenoid.
  6. Remove the retaining bolt (2) from the VVL solenoid.
  7. Remove the VVL solenoid from the cylinder head cover.
  8. The O-ring seal can be reused if not damaged.
scientia non olet · About LEMON Manuals