LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery (Service Information) >> Battery >> Removal And Installation >> Cranking >> Installation

Removal And Installation: Cranking: Installation

  1. If the battery was replaced, install the new thermal cover to the battery.
  2. Position the battery to the battery tray.
  3. Engage the battery hold down retainer by installing and tightening the hold down bolt while the battery is installed to the tray in the proper position.
  4. Install the support bracket and securely tighten bolts.
  5. Install the pre-fuse assembly and tighten the cable nuts to the proper. Refer to TECHNICAL SPECIFICATIONS .
  6. Connect the cable connectors to the pre-fuse assembly.
  7. Install the nuts securing the cables to the pre-fuse assembly and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  8. Close the jump post stud cover.
  9. Connect the IBS to the negative battery post and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
  10. Connect the fresh air make up tube.
  11. Install the air inlet duct. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals