Removal And Installation - Fwd: Removal
- Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE
.
- Loosen the band clamp nut (1) at the muffler pipe to cross-under pipe connection then using the (special tool #2049500110, Pliers, Exhaust System PSA) to spread open the exhaust clamp.
- Separate the muffler pipe from the cross-under pipe.CAUTION:
Do not use any tools to remove the rubber isolators, remove by hand only. Soapy water or silicone based lubricant spray may be used to assist removal/installation of isolators. DO NOT use a petroleum based lubricant on the isolators, as damage to the rubber material can occur.
- Remove the support isolator (2) from the muffler pipe assembly.
- Remove the support isolators (1, 2) from the muffler pipe assembly.
- Remove the support isolators (1, 2) from the muffler pipe assembly.
- Remove the muffler pipe assembly from the vehicle.
