Removal And Installation - AWD: Installation
- Install the cross-under pipe (1) into its position between the catalytic converters and exhaust pipe.
- Install the clamp (2) to the cross-under pipe and exhaust pipe, then tighten the clamp to the proper specifications. Refer to TECHNICAL SPECIFICATIONS .
- Install the bolts (1) to the cross-under pipe isolator mount bracket, then tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Install a NEW gasket between the left catalytic converter and cross-under pipe flanges and tighten the fasteners (1) to the proper specifications. Refer to TECHNICAL SPECIFICATIONS .
- Align the clamp (2) to the right catalytic converter flange.
- Tighten the right side exhaust clamp to the proper specifications. Refer to TECHNICAL SPECIFICATIONS .
- Install the cross-under pipe support bolts (1, 2) and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Remove the exhaust pipe support stand and verify proper alignment of the complete exhaust system and adjust if necessary.
- Install the belly pan. Refer to BELLY PAN, ENGINE, REMOVAL AND INSTALLATION , BELLY PAN, FRONT, REMOVAL AND INSTALLATION , BELLY PAN, REAR, REMOVAL AND INSTALLATION , BELLY PAN, REAR SUSPENSION, REMOVAL AND INSTALLATION and/or BELLY PAN, SIDE, REMOVAL AND INSTALLATION .
- Remove the support and lower the vehicle.
