Third Row Outboard: Installation
- Position the third row outboard seat belt and retractor (3) to the bracket (5) on the D-pillar as a unit.
- Install the fastener (4) that secures the retractor (3) to the bracket (5) on the inner body quarter panel and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Position the seat belt turning loop (1) to the D-pillar. Be certain the seat belt webbing between the retractor and the turning loop is not twisted.
- Install the fastener (2) that secures the turning loop (3) to the D-pillar and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Install the quarter trim panel and D-pillar trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL AND INSTALLATION
.
- Install the fastener (1) that secures the lower anchor (2) near the rear of the wheel housing and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS .
- Install the appropriate left or right trim panel (1 or 2) for the seat belt lower anchor bolt.
