Lamp, Courtesy - Door, Flood: Removal

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Driver side illustrated; passenger side similar.

Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
Remove the appropriate left or right front door trim panel. Refer to PANEL, DOOR TRIM, REMOVAL AND INSTALLATION .
Disconnect the door wiring harness lamp connector (3) from the door flood lamp (1).
Push the integral retainer (2) toward the lamp (1) to release the lamp from the door trim panel.
Remove the lamp (1) from the vehicle.