LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2021 >> Voyager LXi, Gas >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lamps/Lighting - Interior (Service Information) >> Lamp, Courtesy >> Removal And Installation >> Lamp, Courtesy - Door, Handle >> Installation

Lamp, Courtesy - Door, Handle: Installation

GC0177610Courtesy of CHRYSLER GROUP, LLC
NOTE:

Driver side illustrated; passenger side similar.

  1. Position the door handle lamp (2) to the door handle unit.
  2. Gently press the lamp (2) into place until the locking tab (3) engages the lamp securely.
  3. Connect the door wiring harness lamp connector (1) to the lamp.
  4. Install the door trim panel. Refer to PANEL, DOOR TRIM, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals