Grand Caravan And Voyager - Lamp, Dome: Installation

Courtesy of CHRYSLER GROUP, LLC

1. Position the dome lamp unit (1) to the mounting hole in the headliner.
2. Connect the wire harness connector to the connector on the back of the lamp.
3. Insert the fixed retainer (4) on the notched (5) end of the lamp housing up into one side of the mounting hole in the headliner.
4. Slide the notched end of the housing into the mounting hole far enough to engage the lens hinge/retainer (3) into the opposite side of the hole in the headliner.
5. Gently and evenly press the lens hinge/retainer end of the lamp into the mounting hole until the bezel of the lamp housing is flush with the headliner.
6. Swing the notched end of the lamp lens (2) into position against the lamp housing, then press on the lens firmly and evenly until it snaps into the housing.
7. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.